7
1. A correctly installed garage door should be manually lifted and closed without much
effort. Good balance of the gate and properly mounted springs are essential for proper
installation.
2. In a situation when the garage door is incorrectly mounted (opening of which requires
to use of large force), the drive should not be installed.
3. Make sure that mounted locking devices have been removed from the gate before
installing the device. In the opposite situation, you can lose your warranty.
4. The power supply socket must be mounted near the place where the drive will be
installed.
5. There should be a gap with a minimum height of 30 mm at its nearest point between
the bottom of the metal rail and the upper part of the garage door (Fig.2).
3. Pre-installation recommendations
As an additional protection for the garage door, we recommend installing
photocells on all installations.
Fig. 2
30 mm minimum
clearance
