13
D
GB
F
E
I
The LCD displays all functions and options as shown in the picture. Some functions
are only visible under certain conditions.
Input
:
Displays whether the sound signal at the input is analogue or digital. If the signal
is digital,“Digital Mode” indicates whether the signal is a surround (AC-3) or stereo
(PCM) signal.
Surround mode:
Informs you on the type of surround signal used. If the function “Pro Logic Auto
On” is on, the unit automatically detects whether the received signal is an AC-3 or
Pro Logic signal.
Mute
:
Blinks when “Mute” is selected and sound from the speakers is switched off.
Test
“Test” blinks when the test function is being performed.
Speaker mode
Displays the chosen speaker mode.
Volume
Displays the set volume.
Balance
Displays the balance settings.
Delay
Displays the set value for the time delay for the surround speakers.
7. Remote control
D
a: ON/OFF button
b: TEST ON/OFF button
c: MUTE ON/OFF
d: Button for increasing volume (balance
control) and time delay (Delay).
e: Button for reducing volume (balance
control) and time delay (Delay).
f: For setting the SURROUND MODE.
g: Reset button. Re-establishes the default
settings of the unit.
h: Pro Logic Auto ON button
i: Selector button for INPUT MODE
j: DELAY setting (time delay for the surround
speakers)
k: BASS selector amplified/normal
l: Speaker mode for setting the number of
speakers
m: Button for setting the balance
