Step 9
5
With two people (one on each end), lift a wall panel and walk it in between
two legs. Locate the pin that faces downward on the inside edge of the wall
panel and insert it into the hole found on the counter support. Repeat this
step for the opposite side of the wall panel.
Step 10
After attaching the top of the wall panel, attach the bottom by inserting the
pin found on the bottom of the leg into the hole found on the inside edge of
the wall panel. Repeat this step for the opposite side of the wall panel.
Step 11
Attach the remaining five wall panels using steps 9 and 10. **It may be neces-
sary to adjust the legs left or right for the panels to reach each leg.**
Step 12
Locate the counter pieces and install the first section by placing it on top of
the counter supports on the inside of the structure. The widest edge of the
counter should be flush with the outside of the wall panel and the shorter
edge angling in towards the inside of the structure.
HEXAGON PAVILION
