www.tentipi.com
A
B
Before using the product, please read “Care instructions, hints and advice” at tentipi.com/support
Then pull the ventilation system’s regulating cords through
the buttonhole band at the top of the inner tent (B). Pull the
cords in from the outside.
A half inner tent is attached to the outer tent before the Nordic tipi is pitched. Make sure the doors are positioned in line with each other.
Attach the inner tent to the three fastening points at the top
of the Nordic tipi (A) that are not already being used for the
ventilation system’s regulating cords.
Stretch the half inner tent’s floor by tightening the floor
tensioners from outside the tent.
Then pitch the inner tent together with the outer tent as
described in 1–7. Put the central pole on the reinforced area
inside the half inner tent.
Attach the bottom of the inner tent in four places by putting
the toggle on the outer tent’s ground straps through the
O-ring on the inner tent’s floor tensioners.
The snow flap can be folded outwards and then the floor
tensioners will be under the outer tent canvas.
If you want to have the snow flap folded inwards under the
floor, pull the floor tensioners through the openings in the
outer tent canvas. The openings can be fastened with Velcro
(on newer tents).
Mounting a half inner tent
Neither a fire nor a stove can be used in Olivin when
an inner tent is mounted.
