15, Give a strong pull before
15, Give a strong pull before
cranking the ratchet.
cranking the ratchet.
14, Lift the Trillium off the ground
14, Lift the Trillium off the ground
by pulling through excess
by pulling through excess
strap at each point.
strap at each point.
12, Feed the tree strap end
12, Feed the tree strap end
through the spindle.
through the spindle.
11, Ensuring there’s enough
11, Ensuring there’s enough
length, bring the ratchet
length, bring the ratchet
and tree strap together.
and tree strap together.
13, Feed it in and pull it
13, Feed it in and pull it
through making sure it
through making sure it
does not twist.
does not twist.
15
16
Fitting Strap To The Ratchet
With the ratchet strap attached to
the D-rings, it can now be connected
to the tree straps.
Check each corner of the Trillium base is
aligned to each anchor point.
