4
Remote Control Button Description
(1)Remote Control Launch Window
(2)
【
POWER
】
Standby Button, pressing it, camera goes into Standby Mode;
pressing again, camera goes Power ON.
(3)
【
PT/Reset
】
Camera Pan/Tilt reset Function same with
⑨(
PT/RESET)
CAMERA SELECT
(4)
【
CAMERA SELECT
】
Choose the camera number that needed to control,
to correspond the dial-up code on the back of camera;
(5)
【
POSITION
】
Preset position setup keys, include
【
PRESET
】
and
【
RESET
】
(6)
【
UP
】
camera rotating horizontally in regular installed direction
(7)
【
DOWN
】
camera rotating horizontally in reversed installed direction
(8)
【
PAN-TILT
】
camera rotation control key: press this button and
move by the arrow direction,press
【
HOME
】
to back to the center of vertical and horizontal position.
(9)
【
Camera Pan/Tilt Reset
】
Camera Pan/Tilt reset
(10)
【
MENU
】
.
(11)Slow Zoom Key
【
ZOOM SLOW+
】
Zoom in at low speed
【
ZOOM SLOW-
】
- Zoom out at low speed
(12)Fast Zoom Key
【
ZOOM FAST +
】
Zoom in at fast speed
【
ZOOM FAST -
】
Zoom out at fast speed
(13)Manual Focus Mode
【
MANUAL FOCUS
】
Start manual focus function
【
FAR
】
Manually far focus button, clearer for the distant objects, loose finger
to stop.
【
NEAR
】
Manually near focus button, clearer for
the nearby objects, loose finger to stop.
(14)
【
AUT O FOCUS
】
Auto Focusing Button
(15)
【
L/R DIRECTION/SET
】
Not Applicable for this model.
★
Attentions for Remote Control
1.If remote control doesn't work, please replace batteries.
2.If there is an object between remote control and specialized remote control sensor, the camera will not work.
Please make sure the remote control is aimed at the sensor which in front of the camera when controlling it.
Common Operations Introductions
Refer to the dial-up at the back of camera and choose camera address
number that you want to control
(
1-3
)。
1.Camera Select
2.Camera Direction Control
Turning up
Turning down
Turning to left
Turning to right
*
Note: Press direction key to move the camera.Press the direction key when you need to change the angle. If you want to move
the camera slowly, just click the direction key; If you want to move the camera fast at a large scale, just long-press the button.
CAMERA SELECT
