Product instruction
The use of surveillance devices may be prohibited by law in your country. It is the user’s
responsibility to ensure that the operation of such devices is legal before installing this unit
for its intended use
It is important to first verify that all contents received are complete according to the
Package contents listed below. Take notice of the section Quick Installation Guide before
the Network Camera is installed; then carefully read and follow the instructions in the
Installation chapter to avoid damages due to faulty assembly and installation
The Network Camera is a network device and its use should be straightforward for those
who have basic network knowledge. It is designed for various applications, such as
security surveillance etc.
Notice
1. TF Card
The TF card format should be FAT32, if not, please format it .
2. Power turn on, Power off
The interval time of power on/off must be more than 10seconds, otherwise, it will cause
flash or CPU with serious damaged.
3. If Shaking the Mini cameras, the click voice from camera is normal. Please don’t shake
the Mini camera deliberately to avoid damaging component.
4. When the Mini series Ip camera are in strong light, the slight color cast of image is
normal.
5. As the MINI series with COMS sensor, so the colors are more relatively bright in default
setting. You can adjust it according to the condition.
6. Please check the adaptor, we provide the standard adaptor; please do not change
other adaptors to use.
7. When you update cameras, please note:
Please connect the camera with computer via network cable directly
Please close the other program and windows in the computer;
Please keeps the good power connecting when you update the firmware.
