OPERATING MANUAL
OPERATING MANUAL
English
GB
English
GB
GB
GB
Set with pushbuttons “+” or “-” the required welding current
start the welding
THE DYNAMIC OF THE ARC
It can be changed according to the electrode type.
Example: stainless steel and rutil electrodes must have a “soft dynamic” (close to 0), basic and the majority of the
industrial electrode applications need a “medium dynamic” (10-12), while cellulosic needs a high one.
Setting:
Press the second level pushbutton: the icon “HS” lights and its value appears on the display.
The icon flash for two seconds and durig this time, pressing the pushbuttons “+” and “-” adjust the value.
Two seconds after the last touching the display sort out from setting mode.
ANTI-STICKING
During the MMA welding process, the electrode may stick on the workpiece; thanks to the anti-sticking feature the
current is inhibited until the electrode unstick.
Once active, the “Antisticking” icon flash on the front panel.
ANTISTICKING
Any setting in the MMA (stick) manual mode, once fixed, is considered like a user program; it means once the user
select the stick manual mode again, the last adjustment is recovered and proposed.
Again, if the machine is turned off, for any reason, the last mode and setting are proposed in the front panel.
Summary of Contents for 206
