l
Tera
–
Ohmmeter TOM-600 with temperatur and huminity sensor
l
pce. rechargeable NIMH Mignon (AA) Batteries
l
conductive suitcase with foam insert
l
Plug Power supply 9V-DC / 300mA
l
1 pce. Teflon insulated measurement cord, 1m
l
1 pce. Teflon insulated measurement cord, 5m
l
Serial PC - Cable 9 pol.
l
3,5
“
Disk with Excel PC
–
Software and manual
l
Operating Instructions
l
Certificate of factory calibration
l
2,50 kg Electrode pair trough EOS/ESD S 4.1/S 7.1 and DIN EN 61340
–
5-1, -4-1, -2-3
For Measuring Grounding Resistors and point-topoint resistance, specially for installed
ESD Table or floor coverings
l
Ring Electrode to EOS/ESD S 11.11 + DIN EN 61340
–
5-1, -2-3
comprising to the measurement of transit and surface resistances,
1 shielded and 1 no shielded Measurecord.
The appliance is maintenance-free. If the appliance should get dirty , it can be cleaned with a lint-free cotton
cloth with solvent-free detergent.
Don
’
t open the housing. When the housing was opened you loose warranty.
If the appliance should not be used for a longer time, remove the Batteries out of the appliance.
The interval for factory calibration is normally 1 year.
9. Part of Delivery
10. Optional Accessories
11. Maintenance/Calibration
8
