8.6
I/O Setup page
The following parameters can be set for the relays:
•
Description
– brief description of the output, maximum 10 characters should be used.
•
Pulse Duration
– time for which the relay changes its state, by pushing the "Pulse" button
on "Monitoring" page. This setting applies to all 8 relays
TCW180
can be set to send e-mail alerts if an event occurs on the digital input. The following
fields should be filled:
•
Mail to
– recipient e-mail address
•
Subject –
e-mail subject
•
Message –
e-mail body
In the example above, if an event occurs (closing contact) the controller will send e-mail
message to
info@teracom.cc
with subject "alarm" and e-mail body "door open".
