PCoIP Management Console User Manual
Figure 4-9: Peering a Pair of Devices
Note: After two devices are linked by the MC the MC updates the Zero Client device
session configuration data if it detects a change in a peered Host device’s IP address.
When the MC detects that a Host’s IP address has changed, it looks up the Host’s peer
in the database and attempts to write the new IP address into the Zero Client session
settings. It will keep trying to update the Zero Client until it succeeds. This feature only
works if both endpoints are discoverable by SLP or they advertise themselves to the MC
through DNS SRV or the device PCoIP MC DNS-Based Discovery Prefix configuration
field is equal to the address of the MC managing the device.
Note: This feature is disabled when the
Brokered
setting equals
Yes.
See section 4.8.2
for additional details.
4.2.7
Access Device Web Page
All PCoIP devices have an embedded web server that provides an administrator with
access to device configuration settings and status. Administrators can access this web
server using a standard web browser. The MC provides multiple quick links that access
the device’s web page. Refer to the PCoIP Administrative Interface User Manual
(TER0606004) for additional information on the device web server.
To access a device’s web page from the Device Management web page select the
symbol to the left of the device
Field.
Host symbols are either
or
based on
whether or not the device is linked and Zero Client symbols are either
or
.
TER0812002 Issue 5
43
