15
16
7.Maintenance instructions
How to clear a jam
Remove the power plug of the
garbage disposer from the outlet.
Remove the plug switch from
the disposer opening.
Wearing a thick rubber glove,
insert your hand in the disposer
opening and remove as much
food waste as possible from the
grinding chamber.
1
2
3
If overloaded food waste or foreign objects such as spoons cause jamming during
grinding, the overload protection device will be activated and the garbage disposer will
stop. In this case. a buzzer will sound. Clear jamming with the following procedure:
If the power plug cannot be removed
due to the unreachable position of the
outlet, push down the branch circuit
breaker latch for the garbage disposer
on the distribution switchboard to turn
it OFF.
Insert the enclosed lock release
handle from the disposer opening
into the grinding chamber with the
handle's recess aligned with the
nut at the center of the rotating
blade.
Hook the projection at the tip of
the handle onto the hammer of
the rotating blade, and turn it
either left or right. When the
rotating blade turns, jamming has
been cleared.
Remove foreign objects from
inside the grinding chamber of
the garbage disposer.
（See page 14.）
4
5
6
