28
ã
Terberg Machines B.V. IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
5.4.1.2 AUTOMATIC loading 2-wheel bins,
capacity 80-360 litres EN 840-1
1)
Set the bin lift for 2-wheel bins; the left-hand LED near the 2-wheel bin must light up.
The catcherbar / lid opener will automatically move to the correct position:
Position A
.
2)
Switch to automatic function, press the light green button, the green check light will come on.
3)
Roll the bin up against the pick-up comb.
4)
Let go of the bin as soon as it is lifted; the bin goes up until tilted and then returns to the original position.
5)
Take the bin off of the bin lift when the wheels touch the ground.
The automatic bin lift cycle can be interrupted by pressing either the UP or DOWN button.
The green check light will flash to show that the automatic cycle has been interrupted.
When the lifting chair is back in the starting position the green check light will stay on continuously again and
it is then possible to empty bins automatically once more.
A
B
A
B
A
B
Prevent clothes from getting caught behind the handle
.
Roll the bin up against the bin lift with outstretched arms!
The automatic function must be switched on
for each side.
After emptying a 240 litre bin the pick-up
comb will be in too high a position with respect
to an 80 / 120 litre bin. By moving the 80 /
120 litre bin briefly before the start sensor the
lifting chair will automatically descend to the
right height.
In certain circumstances it may happen that a
bin that has just been emptied is automatical-
ly picked up again. Press the DOWN button if
this is not wanted to cancel the cycle!
When the bin is not located correctly on the
pick-up comb and as a result the bin security
switch is not pressed, the upward movement is
interrupted and the bin descends to the bottom
position. When the lifting movement is
interrupted, in spite of the fact that the bin is
located correctly on the pick-up comb, you must
check the bin for damage.
