TD2303-08EN
YTxx2
28
4.1.5
Combined direction indicator, main/dipped beam, horn, wipers (4)
All of the above functions are operated by the
lever on the steering column.
Direction indicators:
Moving the lever forwards operates the right-
hand direction indicators, moving it back
operates the left-hand direction indicators.
Main beam/dipped beam, main beam flash:
To change from dipped to main beam, press
the lever downwards. The lever is also used
for flashing the head lamps by pulling it
towards the steering wheel.
Horn:
The horn is operated by pressing the button
on the lever.
Use the horn only to alert other road users.
Front wiper, washer, wiper interval switch:
Turning the lever activates the front windscreen wiper.
J = Interval
0 = Off
I = Speed 1
II = Speed 2 (optional)
Pressing the ring at the end of the handle operates the windscreen washer(s).
4.1.6
Fifth wheel levelling control (5)
The lifting system is connected to the tractor's hydraulic system. The fifth wheel
can be adjusted to any desired height using control lever
5
.
Move the lever forward to lower the fifth wheel.
Move the lever back to raise the fifth wheel.
4.1.7
Additional hydraulic system option (6)
If the tractor is equipped with an additional hydraulic system, control lever
6
should be used.
Terberg shall not be liable for any external equipment, other than that included as part of the
supply contract.
WARNING
It is important to keep the fifth wheel as low as possible when driving on steep
hills, to prevent loss of vehicle stability.
Servicing the fifth wheel or the lifting system may only be carried out if
goosenecks or trailers are not attached and when the lift frame has been
properly supported.
Keep clear of the underside of trailers or lifting systems during coupling.