TD2303-08EN
YTxx2
7
1.2 Instructions for safe use
To ensure safe operation of the tractor, read this manual carefully before driving the
machine. The tractors carry a number of stickers warning users of possible hazards.
The instructions, warnings and messages on the stickers and in the manual must be
observed at all times.
Drivers must inspect the tractor visually before commencing work, and check the instrument
panel immediately after starting and regularly while driving. Instruments must display their
normal values. A number of plates showing information about maximum permissible axle and
trailer loads are located inside the cab.
Every driver using this tractor must be suitably trained and qualified in the use of the
equipment and must be fully acquainted with local site regulations and procedures.
Depending on the equipment of the vehicle and the nature of the work, the training should
cover all equipment and all tasks that have to be carried out by the driver.
All drivers must be suitably equipped with full safety clothing and footwear.
The minimum clothing requirements depend on local site regulations.
Terberg Benschop recommends wearing at least safety clothing that enhances driver
visibility and safety shoes with steel toe caps and soles.
1.2.1
Permissible loads
Recommendations for maximum permissible axle and trailer loads are located inside the cab.
The maximum permissible axle loads on level
ground are displayed on the data plate shown.
AXLE LOAD: Maximum permissible axle load.
TURNTABLE LOAD: Maximum permissible
load on the fifth wheel.
Some models are also approved for use on
public roads. In that case the maximum legal
axle loads are also shown in the first column
next to G.V.W., G.C.W. etc.
G.V.W.:
(Gross Vehicle Weight)
Total weight of the tractor.
G.C.W.: (Gross Combination Weight)
Total weight of tractor and trailer.
