Part No. 40462
DPL-25S • DPL-30S • DPL-35S Super Series
September 2016
Section 1 - Safety Rules
v
Workplace Safety
Be sure to keep sparks, flames and
lighted tobacco away from flammable and
combustible materials like battery gases.
Always have an approved fire extinguisher within
easy reach.
Be sure that all tools and working areas
are properly maintained and ready for
use. Keep work surfaces clean and free of
debris that could get into machine components and
cause damage.
Be sure that your workshop or work area
is well ventilated and safely and
adequately illuminated.
Be sure any forklift, overhead crane or
other lifting or supporting device is fully
capable of supporting and stabilizing the
weight to be lifted. Use only chains or straps that
are in good condition and of ample load capacity.
Be sure that fasteners intended for
one-time use (i.e., cotter pins and
self-locking nuts) are not reused. These
components may fail if they are used a second
time.
Be sure to properly dispose of old oil or
other fluids. Use an approved container.
Please be mindful of the environment.
Personal Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your number one priority.
Read each procedure thoroughly. This
manual and the decals on the machine
use signal words to identify the following:
Indicates the presence of
a hazard that
will
cause
death or serious injury.
Indicates the presence of
a hazard that
may
cause
death or serious injury.
Indicates the presence of
a hazard that
will
or
may
cause serious injury or
damage to the machine.
Indicates special
operation or maintenance
information.
Be sure to wear protective eye wear and
other protective clothing if the situation
warrants it.
Be aware of potential crushing hazards
such as moving parts, free-swinging or
unsecured components when lifting or
placing loads. Always wear approved steel-toed
shoes.
SAFETY RULES
