10.
Remove the fittings on the back of the joystick (lift
arm control joystick only). (fig. 10-7)
11.
Remove the bolts and nuts securing the joystick to
the mounting bracket. (fig. 10-8)
12.
Lift the joystick through the opening in the bracket
and remove it from the machine. (fig. 10-9)
Installation
1.
To install the joystick, reverse the removal proce-
dure.
Lift Arm Float Magnet
Removal
1.
Perform steps 3, 4 and 11 of the lift arm joystick
control removal process.
2.
Remove the allen bolt from the underside of the
magnet. (fig. 10-10)
3.
Disconnect the magnet harness connector from
the machine.
4.
Lift the joystick within the bracket slightly, then pull
the magnet harness and connector through the
bracket past the joystick to remove it. (fig. 10-11)
Installation
1.
To install the float magnet, reverse the removal
procedure.
10-3
Rubber Track Loader
10. Lift-Arm/Drive Controls
10-7
Fittings
10-8
10-9
Required Tools
Socket Wrench
Combination/Open End Wrench
Allen Wrench
10-10
10-11
https://tractormanualz.com/
Summary of Contents for ASV SR70
