Operator's Manual
Fifth Edition • First Printing
Part No. 133571
GR-12 • GR-15 • GR-20
13
Do not place or attach fixed
or overhanging loads to
any part of this machine.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine
Do not transport tools and
materials unless they are
evenly distributed and can
be safely handled by the
person in the platform.
Do not use the machine on
a moving or mobile surface
or vehicle.
Be sure all tires are in good
condition, castle nuts are
properly tightened and
cotter pins are properly
installed.
Work Area Safety
Crushing Hazard
Keep hands and limbs out of mast.
Do not work under the platform or mast without the
battery cover raised.
Use common sense and planning when operating
the machine with the controller from the ground.
Maintain safe distances between the operator, the
machine and fixed objects.
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the slope and side slope rating of the machine.
Slope rating applies to machines in the stowed
position only.
Maximum slope rating, stowed position
30% (17°)
Maximum side slope rating,
stowed position
30% (17°)
Note: Slope rating is subject to ground conditions
and adequate traction.
Summary of Contents for Genie GR-12
Page 1: ......
