Operator's Manual
Fifth Edition • First Printing
Part No. 133571
GR-12 • GR-15 • GR-20
21
Controls
Platform Control Panel
1 Thumb rocker switch for steer function
Press the right side of the thumb
rocker and the machine will turn in
the direction the yellow triangle
points on the platform control
panel.
2 LED diagnostic read out, battery
charge indicator.
3 Platform up button
Press the left side of the thumb
rocker and the machine will turn in
the direction the blue triangle points
on the platform control panel.
Press and hold the platform up
button and the platform will raise.
4 Numeric key pad (if equipped)
7 Low speed lift enable button
Press and hold this button to
activate the low speed platform
function.
8 High speed lift enable button
Press and hold this button to
activate the high speed platform
function.
9 Drive speed button
Press this button to activate the slow
drive function. The indicator light will
be on when slow drive is selected.
10 Horn Button
Press the horn button and the horn
will sound. Release the horn button
and the horn will not sound.
11 Proportional control handle and function enable
switch for drive/steer function
Press and hold the function enable switch on
the platform control handle to activate the drive
or steer function.
Move the control handle in the direction
indicated by the blue arrow on the platform
control panel and the machine will move in the
direction the blue arrow points. Move the
control handle in the direction indicated by the
yellow arrow on the platform control panel and
the machine will move in the direction the
yellow arrow points.
5 Platform down button
Press and hold the platform down
button and the platform will lower.
6 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
Summary of Contents for Genie GR-12
Page 1: ......
