Operator's Manual
Fifth Edition • First Printing
Part No. 133571
GR-12 • GR-15 • GR-20
35
To Position Platform
1 Press and hold the high or low
speed lift enable button.
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground or platform controls to stop
all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Emergency Lowering
1 Pull the Emergency lowering knob.
Operation From Ground
1 Be sure the battery pack is connected before
operating the machine.
2 Turn the key switch to ground control.
3 Pull out the ground and platform red Emergency
Stop buttons to the on position.
To Position Platform
1 At the control panel, press and hold the lift
function enable button.
2 Press the platform up or down button.
Drive and steer functions are not available from the
ground controls.
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
Operating Instructions
To Steer
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Press the platform up or platform
down button.
2 Turn the steer wheels with the
thumb rocker switch located on the
top of the control handle.
To Drive
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the battery level indicator is flashing.
Summary of Contents for Genie GR-12
Page 1: ......
