Operator's Manual
Second Edition • First Printing
Operating Instructions
46 GS
™
-1330m
Part No. 1301858GT
How to Use the Safety Arm
1
Raise the platform approximately 8 ft / 2.4 m
from the ground.
2
Rotate the safety arm away from the machine
and let it hang down.
3
Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.
After Each Use
1
Select a safe parking location–firm level
surface, clear of obstruction and traffic.
2
Lower the platform.
3
Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4
Charge the batteries.
How to Fold Down the Guardrails
The platform railing system consists of one fold
down rail section for the extension deck and one
section for the main deck. All sections are held in
place by four wire lock pins.
1
Fully lower the platform and retract the platform
extension.
2
Remove the platform controls.
Fall hazard. Use caution and maintain a firm
footing on the platform floor at all times while
folding the guard rails.
3
From inside the platform, remove the two
extension deck lock pins.
Keep hands free of pinch points.
4
From the middle of the extension deck railing,
fold down the extension deck rail assembly
toward the rear of the unit.
5
At the rear of the main deck, remove the two
main deck lock pins.
Keep hands free of pinch points.
6
From the middle of the unit, fold down the main
deck railing assembly toward the front of the
unit.
Summary of Contents for Genie GS-1432m
Page 59: ......
