Operator's Manual
Third Edition • First Printing
Operating Instructions
44
GS
™
-
2669BE • GS
™
-
3369BE • GS
™
-4069BE
Part No. 1305656GT
Using the Power Outlet
Using power from the generator may slow or stop
battery charging.
Plug power to platform cable into power outlet on
machine to use the generator power.
How to Use the Safety Arm
1
Raise the platform approximately 8 ft / 2.4 m
from the ground.
2
Rotate the safety arm away from the machine
and let it hang down.
3
Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.
To Extend and Retract Platform
1
Lift the platform extension lock handles to the
horizontal position.
2
Push the platform extension lock handles to
extend the platform to the desired position.
Do not stand on the platform extension while trying
to extend it.
3
Lower the platform extension lock handles and
make sure the extension deck is locked.
Tilt Sensor Activation Settings
Chassis Angle on Wheels
Chassis Angle (side to side)
2°
Chassis Angle (front to back)
3°
Chassis Angle on Outriggers
Chassis Angle (side to side)
0.8°
Chassis Angle (front to back)
3°
When the machine is On Incline and elevated
above the down limit height, the tilt alarm sounds
and the drive and lift functions are disabled.
Lower the machine below the down limit height to
restore drive and lift functionality.
After Each Use
1
Select a safe parking location
—firm level
surface, clear of obstruction and traffic.
2
Lower the platform.
3
Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4
Charge the batteries.
Summary of Contents for Genie GS-3369BE
Page 58: ......