May 2015
Second Edition - First Printing
Part No. 57.0009.0607 GTH-4016 R - 4018 R - 5021 R
19
Work Area Safety
Bodily Injury Hazards
Always adjust the seat and fasten
the seat belt before starting the
engine.
Do not operate the machine with a
hydraulic oil or air leak.
An air leak or hydraulic leak can
penetrate and/or burn skin.
Relieve pressure before
disconnecting hydraulic lines.
Keep away from leaks and pin
holes. Use a piece of cardboard or
paper to search for leaks. Do not
use your hand.
Fluid injected into skin must be surgically removed
within a few hours by a doctor familiar with this type
of injury or gangrene will result.
Stay clear of belts and fans when the
engine is running.
Always operate the machine in a well-ventilated
area to avoid carbon monoxide poisoning.
Improper contact with components under any cover
will cause serious injury. Only trained maintenance
personnel should access compartments. Access by
the operator is only advised when performing a pre-
operation inspection. All compartments must remain
closed and secured during operation.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Conduct a thorough pre-operation inspection of the
machine and test all functions before each work shift.
Immediately tag and remove from service a damaged
or malfunctioning machine.
Be sure all maintenance has been performed as
specified in this manual and the appropriate Genie
service manual.
Be sure all decals are in place and legible.
Be sure the operator's and safety manuals are
complete, legible and in the storage container located
in the cab.
Do not attempt to start the machine by towing or
pushing.
Do not attempt to use the forks or attachments for
prying wedged or frozen loads free.
Do not push or pull objects or loads with the forks,
attachment or boom.
