May 2015
30 GTH 4016 R - GTH 4018 R - GTH-5021 R Part No. 57.0009.0607
Second Edition - First Printing
Controls
1
Steering wheel
Turn the steering wheel to the right to turn the
front wheels to the right. Turn the steering wheel
to the left to turn the front wheels to the left.
2
Transmission control lever - Horn button
Move the transmission control lever away from
you for forward gear. Move the lever toward you
for reverse gear. Move the lever to the center
position for neutral.
Press the top end lever button and the horn will
sound. Release the button and the horn will stop.
3
Seat controls
See “Adjusting the Seat” section.
4
Turn signal - Windshield washer/wiper - High
beams
Move the lever forward to activate the left turn
signal. Move the lever backward to activate the
right turn signal.
Press the top button at the end of the lever to
direct a jet of water onto the cab windscreen.
Rotate the lever tip to operate the windscreen
wiper.
Push the lever down to turn the high beams on
(after pushing the
Road lights switch 30
). Push
the lever up to use high beams for intermittent
signalling.
5
Steering Mode Selector
Rotate the steering mode selector to the right side
to select four-wheel steer. Rotate the steering
mode
selector to the middle position to select two-
wheel steer. Rotate the steering mode selector
to the left to select crab steer.
6
Load Limiting System override key switch
See “Load Limiting System control panel” section.
7
Load Limiting System control panel
See “Load Limiting System control panel” section.
8
Emergency stop push-button
See “Control Indicators and Interlocks” section.
9
Instrument panel
10 Parking brake switch
Push the bottom of the rocker switch to turn the
parking brake on. Push the top of the switch to
turn the parking brake off.
11 Right functions joystick (single)
See “Controller movements” section.
12 Left functions joystick (if equipped)
See “Controller movements” section.
13 Axle differential lock switch
Push and hold the switch to activate the axle
differential lock. Release the switch to release
the axle differential lock.
14 Accelerator pedal
15 Brake pedal
16 Ignition switch
Turn the key to the
position and hold until
the glow plugs preheating indicator light turns
off; when released, key springs back to pos.
I
automatically. Turn the key to position
P
to switch
the control from the cab to platform.
17 DPF switch (EU model)
Push the bottom of the rocker switch to enable
the DPF regeneration. Push the top of the switch
to inhibit the DPF regeneration.
18 Slewing upper structure rotation speed
potentiometer
Turn the potentiometer clockwise to increase the
turret rotation speed.
19 Job-site/road/platform selector
Rotate the selector to the left to select job-site
mode. Rotate the selector to the middle position to
select road transfer mode.
Rotate the selector to
the right side to select platform mode (if present).
20 A/C switch
Push the switch to turn the A/C on. Push the
switch to turn the A/C off.
