May 2015
Second Edition - First Printing
Part No. 57.0009.0607
GTH 4016 R - GTH 4018 R - GTH-5021 R 75
Parking and Storage
Cleaning and washing the
machine
Clean the machine in accordance with the following
instructions:
• Remove any oil or grease traces with a dry
solvent or a volatile mineral alcohol
• Before assembling a new part, remove any
protection product (rust-preventer, grease, wax
etc.).
• Remove any trace of rust from metal parts with
some emery cloth before smearing the part with
a protection product (rust-preventer, paint, oil
etc.).
Do not use water at high pressure for washing the
machine and especially the main valve, the solenoid
valves, electrical parts and the electric rotating joint
if equipped.
External washing
Before washing the machine, check that the engine
is shut down and the doors and windows are closed.
Do not, at any times, use fuel to clean the machine.
Use water or steam. In cold climates, dry the locks
after washing or smear them with an antifreeze.
Before using the machine again, check its conditions.
Internal washing
Wash the machine interior with some water and a
sponge. Do not use water at high pressure. After
washing, dry with a clean cloth.
Washing the engine
Before washing the engine, protect the air intake filter
to prevent water from entering the circuit.
If the machine is to be used in a marine or
equivalent environment, protect it against
salt deposits with an adequate treatment to
prevent rust formation.
Machine disposal
At the end of the machine life, call in a
specialized firm to dispose of it in compliance
with the local or national regulations.
Battery disposal
Used lead-acid batteries cannot be disposed
of as normal industrial solid wastes. Because
of the presence of harmful substances, they
must be collected, eliminated and/or recycled
in accordance with the laws of the EU.
Used batteries must be kept in a dry and
confined place. Make sure the battery is dry
and the cell plugs are tight. Place a sign on
the battery to warn of not using it. If before
disposal the battery is left in the open air,
it will be necessary to dry, smear the box
and the elements with a coat of grease and
tighten the plugs. Do not rest the battery on
the ground; it is always advisable to rest it on
a pallet and cover it. The disposal of batteries
shall be as rapid as possible.
