Part No. 57.4400.9203 GTH-4016SR • GTH-4018SR
35
March 2010
REV A
Section 3 • Scheduled Maintenance Procedures
CHECKLIST D PROCEDURES
D-5
Change Cabin Air Filter
1. Shut the engine down and engage the parking
brake.
2. Pull filter out of the housing accessible from the
outside of the cab.
3. Replace the cartridge.
D-6
Change Oil in the Axles
1. Place a container of suitable size under drain
plug
.
2. To drain the oil remove one the two level plugs
and the drain plug
.
3. Drain all oil.
4. Clean the plug
and tighten it to a 60Nm
torque.
5. Unscrew the oil fi ll plug
and fi ll to the bottom
of the level plug hole with the specifi ed oil.
6. Wait to allow the oil to fl ow through the axle.
Check oil level and fi ll to the specifi ed level if
necessary.
7. Screw the plug
to
a 60Nm torque.
