Part No. 57.4400.9203 GTH-4016SR • GTH-4018SR
77
March 2010
REV A
Section 5 • Settings
SETTINGS
Now it is possible to change parameters by clicking
on arrow in the box of the parameter, arrow up to
increase the value and arrow down to decrease it.
When the system detect that parameter is different
form the initial value the box will become orange.
In order to write data to the unit,
WRITE DATA button
MUST be pressed
, parameters will be soon used
by the unit, but if a function is activated parameters
just written will be used when joystick pass through
neutral.
• Minimum (MIN) driving value is the command
voltage that system uses when a function is
operated and joystick is put just outside central
neutral zone
•
Maximum (MAX) driving value is the command
voltage that system uses when a function is
operated and joystick is put at its maximum
stroke in one direction.
• Ramp-up parameter is the speed at which the
proportional command voltage follows joystick
analog signal when it is increased (it goes away
from neutral position)
• Ramp-down parameter is the speed at which
the proportional command voltage follows input
analog signal when it is decreased (it goes
towards neutral position).
