Sixth Edition • First Printing
Operator's Manual
Maintenance
Part No. 1298036GT
IWP
®
Super Series
35
Maint enanc e
Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the
operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer’s specifications
and the requirements specified in the
responsibilities manual.
Dispose of material in accordance with
governmental regulations.
Maintenance Symbols Legend
The following symbols have
been used in this manual to help
communicate the intent of the
instructions. When one or more
of the symbols appear at the
beginning of a maintenance
procedure, it conveys the
meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Check the Batteries - DC Models
Proper battery condition is essential to good
machine performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in component damage and
hazardous conditions.
Electrocution hazard. Contact
with hot or live circuits may
result in death or serious injury.
Remove all rings, watches and
other jewelry.
Bodily injury hazard. Batteries
contain acid. Avoid spilling or
contacting battery acid.
Neutralize battery acid spills
with baking soda and water.
Perform this test after fully
charging the batteries.
1
Put on protective clothing and eye wear.
2
Remove the battery vent caps.
3
Check the battery acid level. If needed,
replenish with distilled water to the bottom of
the battery fill tube. Do not overfill.
4
Install the battery vent caps.
Summary of Contents for Genie IWP Series
Page 44: ......
