Operator's Manual Supplement
First Edition • Second Printing
Installation Instructions
14 Lift
Guard
™
Contact Alarm
Part No. 1288739GT
34
Secure the cable guide to the platform with the
retaining fasteners set aside.
Torque = 136 in-lbs / 15,5 Nm.
35
Gently pull the harness towards the non-steer
end of the machine. Tighten the cable ties.
36
Route the loose end of the harness assembly
towards the non-steer end of the machine.
Secure the harness to the cable guide using
button cable ties. Do not tighten the cable ties
at this.
Genie part number 56361GT.
37
Secure the cable guide to the platform with the
retaining fasteners set aside.
Torque = 136 in-lbs / 15,5 Nm.
38
Gently pull the harness towards the non-steer
end of the machine. Tighten the cable ties.
39
Mount the lift guard assemblies to the platform
railings. Refer to the illustrations on page 16 for
mounting locations.
Genie part numbers 1287673GT or
1292500GT.
40
Connect the lift guard assembly to the coil cord
at the steer end of the machine with the 20 inch
link cable.
Genie part number 1288572GT.
41
Secure the cable to the platform railing using
cable ties.
42
Connect the lift guard assembly to the harness
in the cable guide at the non-steer end of the
machine with the 45 inch link cable.
Genie part number 1288574GT.
43
Secure the cable to the platform railing.
Models with a chain gate:
Secure the cable
to the upright post of the platform railing.
Models with a swing gate:
Secure the cable
to the upright post of the platform railing using
cable tie mounts.
Genie part number 110149GT.
44
Update the control system software (if
required). Refer to the Software Update
section.
Summary of Contents for Genie Lift Guard GS-4047
Page 20: ......
