Terex Genie Lift Guard GS-4047, Operator'S Manual Supplement

Operator's Manual Supplement

First Edition • Second Printing

Software Update 

18 Lift 

Guard

™

 Contact Alarm

Part No. 1288739GT 

Firmware Site Download 

Note: Access to the internet is required to 
perform this procedure.

1

Click on the Hyperlink below or open an 
internet browser and copy and paste or type 
the link into the address bar and press enter. 

http://firmware.genielift.com

2

Select 

Machine Model. 

Select 

Search.

3

Under 

Application Firmware

, select the 

Firmware File

 for 

PROP LIFT 

and save it to 

your desktop. 

4

Locate and open the file saved on your 
desktop. 

5

Right click on the 

.zip

 file and select 

extract 

all

. 

Note: Verify the 

Show extracted files when 

complete 

box is checked. 

6

Select and open instructions 

216767 

under 

Application Firmware

. 

7

Refer to Machine Application Mode procedure 
to complete the software upgrade. 

8

Download the 

Instructions

 and follow the 

procedures to update the machine software. 

Note: After the control system software has been 
updated, the contact alarm option must be 
activated at the ground controls to function 
properly. Refer to Activating or Deactivating the 
Contact Alarm. 

Activating or Deactivating the 
Contact Alarm 

Note: The contact alarm must be activated in the 
options menu for the machine to function properly 
when it has been installed on the machine. 

Note: The contact alarm must be deactivated in the 
options menu for the machine to function properly 
when it has been removed from the machine. 

1

Turn the key switch to the ground controls 
position and pull out the red Emergency Stop 
button to the on position at the platform 
controls. 

2

Press and hold the ground control scroll up and 
scroll down buttons. 

1 

scroll down button 

2 

enter button 

3 

scroll up button 

4 

escape button 

5 

LCD display 

137562

4

3

2

1

1

5

3

2

4