First Edition • Second Printing
Operator's Manual Supplement
Introduction
Part No. 1288739GT
Lift Guard
™
Contact Alarm
3
Contact Alarm Safety
Read, understand and obey all warnings and
instructions provided with the contact alarm.
Do not exceed the rated platform capacity. The
weight of the contact alarm assembly will reduce
the rated platform capacity and must be subtracted
from the total platform load.
The standard contact alarm configuration weighs
20 lbs/9 kg. Each additional contact alarm
assembly added to the platform weighs
3 lbs/1.4 kg.
Note: The standard configuration consist of two
contact alarm assemblies attached to the platform.
Be sure the contact alarm is securely installed.
When the contact alarm assembly is attached, this
manual should be considered a permanent part of
your machine and should remain with the machine
at all times.
The contact alarm assembly should never be
mounted above the decal plate of the extension
deck or above the platform entry.
Symbol and Hazard Pictorials
Definitions
Standard contact Alarm weight.
20 lbs/9 kg.
Each additional contact alarm
assembly.
3 lbs/1.4 kg
Read the supplement manual,
part number 1288739GT.
Pre-operation Inspection
Be sure that the operator’s, safety manual,
responsibilities manual and any necessary
supplements are complete, legible and in the
storage container located in the platform.
Be sure that all decals are legible and in place.
Check the Contact Alarm for damage, improperly
installed or missing parts and unauthorized
modifications.
Nuts, bolts and other fasteners
Wiring, cables and Contact Alarm
components
Cracks in structural components
Dents or damage to the Contact Alarm
20 lbs /
9 kg
1288739GT
Summary of Contents for Genie Lift Guard GS-4047
Page 20: ......
