Operator's Manual
Second Edition • First Printing
Work Area Safety
14 QS
™
-R12 • QS
™
-R15 • QS
™
-R20
Part No. 1297730GT
Crushing Hazard
Keep hands and limbs out of mast.
Do not work under the platform or mast without the
battery cover raised.
Use common sense and planning when operating
the machine with the controller from the ground.
Maintain safe distances between the operator, the
machine and fixed objects.
Be sure loads on bike racks and in parcel trays are
securely positioned and balanced.
Use care when transferring loads to and from
parcel trays and to and from bike racks.
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the slope and side slope rating of the machine.
Slope rating applies to machines in the stowed
position.
Maximum slope rating, stowed
position
30% (16.7°)
Maximum side slope rating, stowed
position
30% (16.7°)
Note: Slope rating is subject to ground conditions
with one person in the platform and adequate
traction. Additional platform weight may reduce
slope rating. See Driving on a Slope in the
Operating Instructions section.
Fall Hazards
The guard rail system provides fall protection. If
occupant(s) of the platform are required to wear
personal fall protection equipment (PFPE) due to
job site or employer rules, PFPE and its use shall
be in accordance with the PFPE manufacturer’s
instructions and applicable governmental
requirements. Use approved lanyard attachment
point provided.
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not sit, stand, or climb
on the platform guard
rails. Maintain a firm
footing on the platform
floor at all times.
Do not climb down from
the platform when raised.
Do not enter or exit the
platform unless the
machine is in the stowed
position.
Summary of Contents for Genie QS-12R
Page 57: ......
