background image

Operator's Manual Supplement

 

Second Edition • First Printing

 

Important Information 

 

 

Lighting Technicians and Studio Grips Supplement

 

Part No. 1314078GT 

 

Limited Purpose of This Manual 

This Supplemental Manual was prepared by Genie 
at the express request of unions representing Set 
Lighting Technicians and Studio Grips. These 
operators requested Genie's written permission to 
use the Approved Models listed in certain ways 
that deviate from Genie's standard manuals for 
that equipment. This Supplemental Manual 
contains Genie's written permission and the 
requirements that must be followed by specifically 
trained operators to enable them to use the 
Approved Models in the manner set forth in this 
Supplemental Manual. 

Proof of Training and Records 
Retention 

Qualified trainers shall provide proof of training to 
all successful trainees. The document evidencing 
training shall include the following information: 

 

The name of the person (operator) being 
trained or retrained. 

 

The name of the organization providing 
training or retraining. 

 

The name of the trainer(s). 

 

Clear identification that the training covered 
the applications contained in this 
Supplemental Manual. 

 

The date of training. 

Records of training shall be retained by the 
trainers for at least four years and shall include all 
the information listed above. 

 

Summary of Contents for Genie S-45 Trax


















Reviews:

Related manuals for Genie S-45 Trax