Service and Repair Manual
December 2019
Axle Components
126
SX
™
-150
Part No. 1300669GT
Delete all Steer Sensor Calibrations
11 Press the
enter
or
previous
button on the
LCD screen until DELETE ALL STEER
SENSORS CALIBRATION is displayed. Press
the
plus
button to select YES, then press the
enter
button to accept.
12 Press the
enter
or
previous
button on the
LCD screen until EXIT is displayed.
13 Press the
plus
button to select YES, then
press the
enter
button to accept.
14 Proceed to step 21.
Delete a Single Steer Sensor Calibration
15 To calibrate a single steer sensor, delete the
specific steer sensor calibration
16 Press the
enter
or
previous
button on the
LCD screen until DELETE _____ STEER
SENSORS CALIBRATION
is displayed.
Example: DELETE
BLUE
END
BLUE
SIDE
STEER
SENSORS
CALIBRATION
(FL).
17 Press the
plus
button to select YES, then
press the
enter
button to accept.
18 Press the
enter
or
previous
button on the
LCD screen until EXIT is displayed.
19 Press the
plus
button to select YES, then
press the
enter
button to accept.
20 Push in the red Emergency Stop button to the
off position.
21 Remove the fastener that was temporarily
installed. Close the control box door and install
the door retaining fasteners.
Note: When the control box door is closed, the
calibration toggle switch is automatically activated
to exit out of calibration mode.
22 Use the key to turn the bypass / recovery key
switch to the run position.
Note: Be sure that the bypass/recovery key switch
is in the run position before attempting to operate
the machine.
Summary of Contents for Genie SX-150
