Operator's Manual
First Edition • Second Printing
Controls
26
Z-60/37DC • Z-60/37FE
Part No. 1270491
Platform Control Panel
1
Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
2
Platform level switch
Move the platform level
switch up and the level of the
platform will raise. Move the
platform level switch down
and the level of the platform
will lower.
3
Jib boom up/down switch
Move the jib boom switch
up and the jib boom will
raise. Move the jib boom
switch down and the jib
boom will lower.
4
Platform rotate switch
Move the platform rotate
switch to the left and the
platform will rotate left.
Move the platform rotate
switch to the right and the
platform will rotate right.
5
Primary boom extend/retract switch
Move the primary boom
extend/retract switch up and
the primary boom will
retract. Move the boom
extend/retract switch down
and the primary boom will
extend.
6
Function speed control switch
Move the switch to the left and the function
speeds for jib up/down, platform rotate and
primary boom extend/retract will decrease.
Move the switch to the right and the function
speeds for jib up/down, platform rotate and
primary boom extend/retract will increase.
Note: Function speeds will increase or
decrease by 5% each time the speed control
switch is moved. The speed control switch can
also be held in either direction to increase or
decrease function speed.
7
Emergency power switch
Use emergency power if the primary power
source fails.
Simultaneously hold the emergency power
switch up or down and activate the desired
function.
8
Inverter switch (if equipped)
Move the inverter switch up to activate the
inverter. Move the switch down to turn off the
inverter.
