Operator's Manual
First Edition • Second Printing
Operating Instructions
46
Z-60/37DC • Z-60/37FE
Part No. 1270491
FE Models: Starting the Engine
From the ground control panel:
1
Turn the key switch to ground control.
2
Be sure both ground and platform control red
Emergency Stop buttons are pulled out to the
on position.
3
Move the machine mode select switch to
hybrid mode.
4
Push the function enable button
to start the engine.
From the platform control panel:
5
Turn the key switch to platform control.
6
Be sure both ground and platform control red
Emergency Stop buttons are pulled out to the
on position.
7
Move the machine mode select switch to
hybrid mode.
8
Press down the foot switch to start the engine.
If the engine fails to start after 15 seconds of
cranking, determine the cause and repair any
malfunction. Wait 60 seconds before trying to start
again.
In cold conditions, -6°C and below, warm the
engine for 5 minutes before operating to prevent
hydraulic system damage.
In extreme cold conditions, -18°C and below,
machines should be equipped with optional cold
start kits. Attempting to start the engine when
temperatures are below -18°C may require the use
of a booster battery.
Operation from Ground
1
Turn the key switch to ground control.
2
Pull out the red Emergency Stop button to the
on position.
3
FE Models: Select DC mode or Hybrid mode.
4
FE Models: Start the engine.
To Position Platform
1
Press and hold a function enable
button.
2
Move the appropriate toggle switch according
to the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
