Figure 9-11
5.
Disconnect the gas springs, then remove the bolts
securing the hood as shown to allow for removal.
Figure 9-12
6.
Carefully remove the hood from the machine and
set it aside.
Figure 9-13
7.
Remove the bolts securing the rear valance panel
to the chassis to allow for removal.
Figure 9-14
8.
Carefully remove the rear valance from the
machine to allow access to the loader valve.
Figure 9-15
9.
Locate the loader valve on the side of the
hydraulic reservoir.
Figure 9-16
10.
Disconnect all of the tubes from the loader valve.
Cap and plug all openings to prevent fluid loss.
9-5
Compact Track Loader
9. Loader/Transmission Controls
Loader Valve
Disconnect
