Document 57.4400.7200 - 1
st
Edition 03/2005
INDEX
7
7
TELELIFT 3713 Elite - 4017 - 4514
REPAIR PROCEDURES
7.2.2
Dismantling the hose guiding chain -
Telelift 4017
If you have to remove the hose guiding chain from the
boom, proceed as follows:
Before disconnecting the hydraulic piping, place
containers of suitable size underneath to avoid oil
spillage.
-
Remove the 4 coupled hoses
A
connected to the
iron pipes under the boom and place 4 plugs so you
can move the machine without oil leaking.
-
Remove the rear cover and extend the boom until
the second telescope is beyond the two openings
under the boom.
-
Move to the rear side of the machine and pull the 4
hoses off the boom.
-
Remove the first chain sliding roller
B
located on
the third telescope, then remove the second roller
C
located on the fourth telescope.
-
Disconnect the flex hoses from the pipes being
careful to mark their position to help reassembly.
5
A
B
C
D
E
Summary of Contents for TELELIFT 3713 Elite
Page 4: ...Courtesy of Crane Market...
