Page 28/62
Rev. A
2017-12-04
SCANTER 1002 Radar System
User’s Manual
1255194-HO
Operational access level allows the user to change the most commonly used
parameters and to operate the radar.
The service access level allows to change all parameters, while the debug access
level is intended for technicians having intensive and detailed knowledge about the
radar system.
5.2.3
User documentation
The RST “DocLib” view contains a list of documents stored on the transceiver, such
as technical manuals.
5.2.4
Parameters and BITE access
Access to all necessary parameters is available through the RST.
The RST provides status on radar functions and performance as well as detailed
status on all modules in the system. All BITE information available about the mod-
ules is shown together with any status or error message issued by the module.
5.2.5
Tools
In addition to live radar video, the RST provides the user with operator’s tools, such
as A-Scope, EBL, VRM, continuous zoom, histograms, primary-, secondary- and
AIS tracks, plots, maps, etc.
These operator’s tools allow the user to perform a detailed analysis of the system
performance. Display of track data is possible by clicking on the individual target,
in combination with a right-click menu.
5.2.6
Situation display
The situation display presents live video, A-Scope, EBL, VRM, continuous zoom,
histograms, primary-, secondary- and tracks, plots, maps, etc.
These operator tools are available to allow the user to perform more detailed
analysis of the system performance. Display of track data is possible by mouse
click on the individual target, in combination with a pop-up menu (right mouse click).
The situation display is one of five default perspectives, all described in the follow-
ing.
5.3
RST screen layout
The Radar Service Tool screen layout is shown in
Fig. 5.1 (p. 29)
with definitions
of the different operation areas.
