“VT-TMP” heating constant temperature bath Operating manual
6
The operating principle of the bath is
based on supporting a preset constant tempera-
ture of flowing thermal fluid in the bath tank and
providing a good temperature uniformity of the
operating bath. The circulation of thermal fluid
around test vessels is provided by the rotary
pump, which is located in heating immersion cir-
culator 1.
Maintaining of the preset temperature by means of heating is provided by immersion circula-
tor 1. To operate the instrument, read the “M01 Heating Immersion Circulator. Operating manual”.
When operating instrument with thermal fluid temperature close to ambient, it might be nec-
essary to provide the cooling by means of built-in coil.
Environmental Conditions
Indoor use only.
Ambient temperature: +10...+35
°
C.
Air humidity: max. relative humidity 80 % for temperatures up to +31
°
C,
Max. mains fluctuation of ±10 % are permissible.
Safety Recommendations
Avoid strikes to the housing, vibrations, damage to the operating element panel (keypad, dis-
play), and contamination.
Do not store the instrument in aggressive atmosphere.
Protect the instrument from contamination.
Only qualified personnel are authorized to perform configuration, installation, maintenance
and repairs of the circulator.
Routine operation can also be carried out by untrained personnel who should however be in-
structed by trained personnel.
!
CAUTION: The instrument is not for use in explosive atmosphere.
4
