10
7. MARKING AND PACKING OF THE STOVE
7.1. Marking
On a stove there is an information code plate with details about a model of a stove, its mass, factory
serial number, production date of a stove and other technical features, and also the information on
certificates for this model.
7.2. Packing
A stove is packed in a transport pack. Maintenance manual in a packaging bag and components are
enclosed in the stove combustor.
On a pack of a stove at the front part there is a label with information about a model of a stove, its
mass, design features and production date.
7.3 Procedure of remove the packaging by a consumer
1.
Cut a packing tape
2.
Remove cardboard boxes
3.
Remove a polyethylene
4.
Pull from a stove maintenance manual and components (if available) and take off a packing
5.
Take away blocks and turn off fixing bolts
6.
Remove advertising stickers from a surface of a protective film.
8. SUITABLE APPLICATION
8.1. Operational constraints
ATTENTION! Don’t use the stove for industrial premises of categories A (А), B (Б), V (В)
of fire and explosion safety in accordance with NPB (НПБ) 105-95 (classification of
premises and buildings of fire and explosion safety).
ATTENTION! Don’t use matters as fuel which aren’t mentioned under point 5.
ATTENTION! Expressly prohibited using charcoal and coal briquettes as fuel.
ATTENTION! Don’t use alcohol-containing means, benzene, kerosene and other highly
inflammable matters for ignition. Don’t use a glossy paper, trimmings of wood particle
boards, laminated flooring board, orgalite because these matters would evolve noxious
substances under burning, and would be cause of outburst and damage of a stove.
ATTENTION! Don’t use the stove with an empty heat exchange unit and a hot-water tank
or an unconnected system of water heating (if available).
ATTENTION! Don’t use the stove inappropriately.
ATTENTION! Don’t use the stove in autohouses, trailers and tents.
ATTENTION! Don’t commit overheating of the stove at the time of its operation.
