11
Overheating of the stove can be identified by red glow of the metal in the dark.
This situation can appear upon the uncontrolled air supply into the fire box. For example, when the
door is open. The stove warming up may lead to dangerous conditions of the stove operation and its
premature breakdown.
8.2. Commissioning of the stove
ATTENTION! At the time of the first heating of the stove applied on the metal industrial
oils and light volatile compounds of organosilicone enamel evolve smoke and smell,
which aren’t evolved in the following.
People having chest troubles and owners of the pets susceptible to smoke (for example birds) should
take precaution measures.
The first heating of the stove it is necessary making open-air with fire prevention discipline, at least
one hour, with charging of a fire box in half in the regime of active combustion.
For correct operation of the stove, at the time of the first heating it is necessary to organize a
temporary flue with height at least 2m.
For the model of stove with built-in heat exchange unit it is necessary to organize temporary water
heating system during the first pre-heating.
ATTENTION! Don’t make mechanical action to a surface of a stove till complete cooling
and final polymerization of paint at the time of the first heating in order to avoid damage
of a lacquer coating.
ATTENTION! The first heating of the model «Vitra» shall be carried out with opened
door of combustor to prevent smoked translucent screen.
Please, make sure in normal functioning of the all components of the stove and protective
constructions. A faulty stove is not permitted to operation.
An efficient stove:
Doesn’t have external damages of a carcass.
A door freely revolves on hinges, closely adjoins to a carcass and is efficiently fixed by a lock.
A translucent screen on a door (if available) doesn’t have damages.
Fire bar is safe without burnouts and cracks.
An ash drawer has to freely move and it closely adjoins to a carcass in the closed position.
A heat exchange unit (if available) doesn’t have any damages.
8.3. Stones for stones section
It is necessary to load special stones into stones section. The manufacturer recommends using
gabbrodiabase, peridotite, talcum peach, jadeite. These volcanic rocks possess a beautiful pattern and
composed of durable minerals against physical and chemical action. Also, these volcanic rocks don’t
contain harmful impurities. These volcanic rocks possess considerable heating capacity, stand against large,
repeated temperature differential. Also, stones are fireproof and don’t break. Irregular shape of stones and
difference of its sizes provide maximum filling of stones section and maximal area of heat output.
ATTENTION! Stones of unknown origin can contain, numerously, harmful sulfides and
radionuclides, which make its useless and even dangerous for using in a sauna.
