10
INSTALLATION
When choosing the flue, you must consider its compatibility with the proposed stove, check recommended
fuel, efficiency, ease of assembly, disassembly and maintenance, and compliance with fire regulations.
Flue line should have a minimum number of bends. The straight flue line is preferable. The flue height,
measured from the grate to the mouth, should be not less than 16.5 ft (5 m).
1.
Flue cap
2.
Bracket
3.
Metal sheet on fire-proof supports
4.
Fence of non-combustible material
5.
Flue heat insulation
6.
Attaching points for additional securing to the
floor, if needed
Picture 3. Example of the stove installation