ENGLISH
• Rest the appliance on a firm flat surface.
• Place the iron on the boiler support base (14).
• Select the right temperature by turning the control knob (20) on the
iron (figure 1).
• Completely unwind the power cord by drawing it out from its storage
(12) and plug into the outlet.
• Press the push button (3) to turn the iron on.
• The iron is ready to be used when the indicator light (21) goes out.
• The indicator light (21) on the iron will go on and out automatically
while you are ironing to show that the soleplate is being kept at a
constant temperature.
• When you have finished ironing, press the push button (3) to turn the
appliance off. Let the iron cool down.
FOR DRY IRONING
Fig.2
11
12
AFTER USE
Before putting the
appliance away,
pres s the push
button
(11)
to
automatically wind
the power cord in
its storage (12)
(see figure 2).
During this op-
eration, it is rec-
ommended guiding the power cord while it is wound.
Also wind the iron-boiler connecting tube (10) in its storage (13)
around the boiler shell (1), as shown in figure 3.
Fig.3
13
10
1
