17
a competent qualified electrician or a person with similar qualifications, in order to
avoid any risk.
Attention
: The appliance may only be used if complete with the support.
To use the heater, act as follows:
1) Insert the plug into the socket.
2) To turn on the stove and check the power, turn the knob , these modes:
I= 450W I I= 900W
3)
To activate oscillation (right-left) turn the knob anticlockwise
4)
In the case that the heater is accidentally knocked over, the safety switch in the
base will turn off the device: reposition the carbon heater and it will resume
normal operation.
5)
To switch the appliance off, turn the selector to the “0” off position and remove
the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use,
especially for long periods.
CLEANING AND MAINTENANCE
Attention
: before cleaning the appliance, switch off, unplug and wait for
before it has completely cooled down.
•
Protect the reflecting plate from dust to keep save its reflecting
characteristic.
•
To clean the body use a soft damp cloth; do not use abrasive products.
•
The protection grill and the smocking net are very delicate; to clean them
only use your vacuum cleaner, paying attention not to damage them.
•
When the sove is not in use it is necessary to cover and put it in a dry
place. We advise to use the original packing to preserve it from dust and
humidity.
•
The carbon heating elements must be substituted with a special tool:
please contact a competent qualified electrician.
•
If you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have
disconnected the plug from the socket) and make dangerous parts
harmless if children are allowed to play with them.
