Using the features
EN-29 Digital LCD Television Instruction Manual
PLAYING AN AUDIO CD
❖
Insert a CD in the same way as you would a DVD,
A
with the label facing away from you.
The CD will load and a menu of the disc’s contents
B
will appear on screen.
Use the
C
and
5
buttons to highlight the track
you wish to play and press
PLAY/PAUSE
, or just
press
PLAY/PAUSE
to listen to the whole CD from
the beginning.
You can stop, pause, fast forward or fast rewind a
CD in the same way as a DVD. You can also use the
REPEAT
button to repeat a track, folder album or
the contents of the whole disc. Press repeatedly
to select what you would like to repeat. You can
also use the A-B function to repeat a certain
section of a track or CD.
Reference Sections
TROUBLESHOOTING
To assist in location of possible faults use the help
guide below:
No picture, no
sound
Verify if the television is
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.
Blank screen
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.
No sound
Press
MUTE
button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press
VOL+
button to see if the
problem can be solved.
Poor sound
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
No picture in
some channel
Verify if correct channel is
selected.
Adjust the antenna.
No color for
some channel
program
(black and
white)
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.
Spots with
some or all
pictures
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
Television out
of control
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
Note
If the fault can not be repaired using the above
❏
guide consult with your local authorized service
centre.
The TV set must only be repaired by a qualified
❏
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.
Specification
SCREEN SECTION
Type
A-si TFT active matrix
Viewable angle
160(H) 150(V)
(26" digital LCD TV)
176 (H) 176 (V)
(32"/42" digital LCD
TV)
