9
4. System Settings
This category depicts information about the system’s settings as follows:
4.1 Status
- Depicts the status of the modulator (Idle or Running)
4.2 FW Version
- Depicts the firmware version of the uP
4.3 SW Version
- Depicts the software version of the TERRA GUI
4.4 HW Version
- Depicts the hardware version of the MHD101
4.5 Serial number
- Depicts the serial number of the device
Buttons
● By pressing the “Get” button in any sub-category, all the settings of this category are downloaded from the modulator.
● By pressing the “Apply” button in any sub-category, all the settings of this category are uploaded to the modulator.
● The “Factory Defaults” button sets the modulator’s setting to factory default.
● The “Reset System” button applies a reset to the modulator.
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled or discarded
according to applicable local and national regulations.
Equipment intended for indoor usage only.
Functional grounding. Connect to the main potential equalization.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN60065, RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical equipment“
CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.