8
External supply 2 UP412 :
•
Voltage
Displays the output voltage of power supply No 2;
•
Current
Displays the current consumption of power supply No 2;
•
Temperature
Displays the temperature inside the power supply No 2.
Transmitter maintenance
System maintenance page (Figure 13) allows the restart and/or restore all default settings of device.
All operations will be executed by pressing the “Execute” button.
Figure 13. Maintenance page
The transmitter is supplied with the following default settings:
Table 1
. Default transmitter settings.
Figure 14. Firmware upgrade of transmitter server
Note
: The buttons are shown in different languages, depending on the actual Windows regional setting.
It is recommended to perform software upgrade by connecting the transmitter directly to PC.
Parameter
Value
Laser
OF
Gain Control
Manual
Attenuator
15 dB
Equalizer
0 dB
Freq band
862 MHz
Firmware upgrade
It is possible to update the server firmware by uploading it to the optical transmitter using the device server software upload menu as shown below.
