3
EQUINOXE - WEATHER STATION
INITIALISATION
Receiver:
Insert the battery(s) in the battery compartment, making
sure that the polarities are correct, or, use the mains adaptor to
power the receiver.
Remote sensor:
Use a screwdriver to remove the screws on the
battery compartment and insert the batteries.
When the batteries have been correctly inserted, the LCD screen
will light up and the receiver will beep. The indoor temperature,
indoor humidity and atmospheric pressure will be displayed almost
immediately.
The receiver icon will begin to flash as it searches for the outdoor
sensor, this process takes up to 3 minutes. When a connection has
been made the outdoor temperature will be displayed.
Important:
The weather forecast is only ready for operation 12 hours
after the batteries have been inserted.
RECEIVER
TIME SETTING
1:
Press and hold the
MODE
button for 3 seconds to enter Set
Mode. The clock display option will flash. Use the
▲
and
▼
buttons to choose between 12hr or 24hr. Press
MODE
to validate.
2:
Next the timezone will flash. Use the
▲
and
▼
buttons to highlight
the correct timezone. Press
MODE
to validate.
3:
Next the hour will flash. Use the
▲
and
▼
buttons to highlight the
correct hour. Press
MODE
to validate.
4:
Next the minutes will flash. Use the
▲
and
▼
buttons to highlight
the correct minutes. Press
MODE
to validate. The screen will now
return to normal mode and display all your validated settings.
Important:
If no button is pressed after 7 seconds the screen
switches from Set mode to Normal clock mode.
PRESSURE TREND INDICATOR
The atmospheric pressure has a trend indicator. There are 3
indicators:
The atmospheric pressure has remained constant for the past
30 minutes
The atmospheric pressure has increased over the past 30 minutes
The atmospheric pressure has decreased over the past 30 minutes
INDOOR HUMIDITY
The indoor humidity display ranges from 20%-95%.
WEATHER FORECAST ICONS
The weather station uses the atmospheric pressure data of the last
4 hours to forecast the weather for the upcoming 12-24 hours.
There are 6 weather icons that can be displayed. The colour of the
light pipe corresponds to each weather icon.
Important:
Please allow 12 hours after the insertion of the batteries
for the correct weather icon to be displayed. The forecast can be
given for a radius of up to 12-20km (7-13 miles).
ALARM SETTING
Press the
MODE
button briefly. The display switches from clock
mode to alarm mode.
To set the alarm
In alarm mode press and hold the
MODE
button for 2 seconds until
the hour begins to flash.
Use the
▲
and
▼
buttons to choose between the required hour.
Press the
MODE
button to validate.
Next the minutes will flash.
Use the
▲
and
▼
buttons to choose between the required minutes.
Press the
MODE
button to validate the alarm.
After completion you will be returned to the normal clock mode.
To activate/deactivate the alarms
To activate the alarm – briefly press the
ALERT
button.
To deactivate the alarm – briefly press the
ALERT
button once
more.
Important:
If no button is pressed after 20 seconds the screen switches from
Set Mode to clock Mode. The alarm (crescendo) will sound for
2 minutes if no button is pressed to deactivate it. In this case the
alarm will be automatically repeated after 24 hours.
When the alarm is sounding press any button to stop the alarm.
Snooze Function
When the alarm is sounding press the
SNOOZE/LIGHT
button
once to enter snooze mode. The alarm will sound again after
5 minutes. When the snooze function is activated, the
Zz
symbol
is displayed.
The snooze function can be repeated up to 7 times.
Press the
ALERT
button to deactivate the snooze function.
Press any button to stop the alarm.
°C/°F
1:
By default the temperature is displayed in °C. Change to °F by
pressing the
▼
button once. Press the
▼
again to return to °C.
2:
The indoor temperature ranges from: 0°C (32°F) to 50°C (122°F)
Sunny
Partly
Cloudy
Cloudy
Rainy
Stormy
Snow
Red light
Purple light
Blue light
Light green
light
Dark green
light
Turquoise
light
Summary of Contents for EQUINOXE
Page 1: ...www terraillon com...