EN
59
CLEANING
Cleaning the unit
1. Turn unit off and disconnect the lead wires from the unit.
2. Clean the device after use with a soft, slightly moistened
cloth. Wipe gently.
• Do not use chemicals (like thinner, benzene).
• Do not let water get into the internal area.
Note:
• This device and accessories do not require sterilization.
Cleaning the electrode pads
1. Turn the power off and remove the lead wires from the
pads.
2. Wash the pads when the adhesive surface becomes dirty
and/or the pads are difficult to attach.
• Wash the pad softly with your fingertips under slow
running cold water for several seconds (do not use a
sponge/cloth/sharp object like a nail on the adhesive side.
Do not use detergents, chemicals or soap).
3.
Dry the pads and let the adhesive surface air-dry
completely (do not wipe with a tissue paper or cloth).
CAUTION:
• The life of pads may vary by the frequency of washing,
skin condition, and storage state.
• If the pads no longer sticks to your skin or the pads are
broken, you should replace them with new pads.
•
Before applying the self-adhesive electrodes, it is
recommended to wash and degrease the skin, and dry it.
Summary of Contents for TRIO CARE
Page 1: ...MANUEL D UTILISATION INSTRUCTION MANUAL ...
Page 2: ......
